Supported-media pre-filter wall

Supported pre-filter walls combine synthetic media and metal mesh for barn intake pre-filtration.

Specifications and data conditions

BSCLEAN Supported-media pre-filter wall

Brochure p. 20 lists media thickness 5±0.2 mm and basis weight 230±10 g/m²; these are media properties, not whole-wall efficiency.

Company material · p. 20

Supported-media pre-filter wall · Company material 20
ParameterReported field
Media thickness5±0.2 mm
Basis weight230±10 g/m²
Support mesh thickness0.4 mm
Support openings20×30 mm
Operating temperature / RH−10–100°C / ≤80% RH

Installation and selection limits

Page 20 separately lists a 130°C media heat-resistance field; assembly operating fields are −10 to 100°C and ≤80% RH. Do not use 130°C as the wall operating limit.

Manufacturer comparison

The table compares published fields. Dimensions, airflow, classes and test conditions differ; it does not establish performance/price rankings or direct interchangeability.

Supported-media pre-filter wall / Camfil 30/30 · 2026-11-20
PropertyBSCLEANCamfil 30/30
Form5 mm supported synthetic mediaCamfil 30/30: pleated panel
Depth example5±0.2 mmCamfil 30/30: 46 mm
Fit boundaryWall construction and seals per projectDiscrete panel; not the same construction

Camfil 30/30 · Official source

Sources and fields to confirm

BSCLEAN values are transcribed from supplied company material, not third-party test reports. Competitor source checked: 2026-11-20。

  • Supplied pig-farm air-filtration brochure · p. 20 · BSCLEAN
  • Camfil 30/30 · 2026-11-20

Confirm 5 data groups before ordering: Wall dimensions, effective area, face velocity, efficiency report, wall pressure drop。

Discuss this product

Buyer questions

Can the supported pre-filter wall operate at the stated 130°C media temperature?

No. Page 20 uses 130°C for media; use conditions separately state −10 to 100°C and ≤80% RH. Confirm the complete assembly.

What data should I send before ordering supported-media pre-filter wall?

Start with 3 inputs: actual mounting dimensions, design airflow and allowed pressure drop; then confirm missing fields and model reports.

Does a filter class for supported-media pre-filter wall guarantee a disease-free farm?

No. Verify at least 3 items: model efficiency, system seals and operating airflow. Filtration does not replace other biosecurity controls.