H13 vs H14 HEPA Filters: A Cleanroom Selection Guide

Compare H13 and H14 HEPA filters for cleanrooms. Check the specified class, pressure drop at rated airflow, filter fit and acceptance documentation.

Start with the specified filter class

H14 has a stricter efficiency requirement than H13 under EN 1822. Use the filter class and test method specified for the project. Confirm the proposed model’s compliance from its technical documentation.

Compare pressure drop at your design airflow

Request the initial pressure drop in Pa at the same airflow in m³/h for each quoted model. Check that the fan can meet design airflow at the pressure allowances in the system design.

Check the housing, seal and filter depth

Measure the usable opening and depth. Record the gasket or gel-seal arrangement and provide the installation drawing or existing label. Ask whether a mini-pleat or separator construction fits the housing and service access.

Specify the acceptance documents

Tell the supplier what the contract requires for factory testing and installed-system verification. Compare documentation for the quoted filter and agree on site test requirements with the commissioning team.

Request filter selection and pricing